Use and Care Manual

TECHNICAL DATA
PEEL STOP –
SPECIALTY CAMOUFLAGE SPRAYS
Rust-Oleum Corporation Form: CS2434
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 042913
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
.PHYSICAL PROPERTIES .
SPECIALTY CAMOUFLAGE SPRAYS
Resin Type
Acrylic Modified Alkyd
Solvents
Acetone, Toluene, Xylene
Fill Weight
12 oz.
MIR
1.20 Max
Practical Coverage at
Recommended DFT
(assumes 15% material loss)
Approximately 6-7 sq. ft./can (0.54-0.63 m
2
/can)
Dry Times at
70°F (21°C) and
50% Relative
Humidity
Touch
20 minutes
Handle
1 hour
Recoat
Within 1 hour or after 24 hours
Dry Heat Resistance
200°F (93°C)
Shelf Life
5 years
Flash Point
-156°F (-104°C)
Safety Information
For additional information, see MSDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.