Specification

TECHNICAL DATA
ROCKSOLID
®
METALLIC GARAGE FLOOR COATING
Rust-Oleum Corporation Form: GDH-605
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 020116
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
.PHYSICAL PROPERTIES .
Resin Type
Cycloaliphatic Amine Converted Urethane Modified Epoxy
Pigment
Varies with color
Solvent
Benzyl Alcohol, Isophorone Diamine, Nonylphenol, Diglycidyl Ether
Weight
Per Gallon
9.1-9.3 lbs.
Per Liter
1.09-1.11 kg
Solids
By Weight
96%
By Volume
97%
Volatile Organic Compounds
<1 g/l
Practical Coverage
at Recommended DFT
One kit covers 100-125 square feet
Dry Times @ 70-80º F
(21-27°C) and 50%
Relative Humidity
†
Touch
6-9 hours
Recoat
12 hours - 7 days*
Foot Traffic
8-10 hours
Vehicle Traffic
24-36 hours
Shelf Life
12 months unopened factory delivered pouches
Flash Point
205°F (96°C)
Safety Information
For additional information, see SDS
Calculated values are shown and may vary slightly from the actual manufactured material.
†
Dry times will be increase if temperatures are less than 55ºF (13ºC).
* If 7 days recoat time has elapsed, the coating must be sanded prior to recoating.
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.