Use and Care Manual

TECHNICAL DATA
CONCRETE STAIN SPRAYS
Rust-Oleum Corporation Form: GDH-1001
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 053017
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
PHYSICAL PROPERTIES .
Physical Properties
CONCRETE STAIN SPRAYS
Resin Type
Water-based Acrylic
Pigment Type
Varies with color
Solvents
Water, Dimethyl Ether, Isopropyl Alcohol
MIR
0.95 Max
Fill Weight
15 ounces
Practical Coverage at Recommended
DFT (assumes 15% material loss)
Approximately 12-16 sq.ft./can
(1.1-1.5 m
2
/can
Dry Times at 70-80ºF (21-
27ºC) and 50% Relative
Humidity
Touch
1 hours
Recoat
1 hour
Shelf Life
5 years
Flash Point
-156°F (-104°C)
Safety Information
For additional information, see SDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature
do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we
can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All
technical information is subject to change without notice.