Instructions / Assembly

TECHNICAL DATA
RESTORE
™
SOLID ACRYLIC STAIN
Rust-Oleum Corporation Form: GDH-100
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 082415
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
PHYSICAL PROPERTIES .
SOLID ACRYLIC STAIN
Resin Type
Water-based Acrylic
Pigment Type
A Blend of Inorganic and Organic Pigments
None
Solvents
Glycol Ethers, Water
Weight
Per Gallon
10.5 lbs.
Per Liter
1.27 kg
Solids
By Weight
49%
By Volume
35%
Volatile Organic Compounds
<45 g/l (0.37 lbs./gal.)
Recommended Dry Film Thickness
(DFT) Per Coat
1.5-2.0 mils
Wet Film Thickness to Achieve
DFT
4.5-6.0 mils per coat
Practical Coverage
at Recommended DFT
200-400 sq.ft../gal.
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
1 hour
Recoat
2 hours
Full Cure
24 hours
Shelf Life
3-4 years
Flash Point
>200ºF (93ºC)
Safety Information
For additional information, see the SDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this
literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our
control, we can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective
materials. All technical information is subject to change without notice.