Instructions / Assembly

TECHNICAL DATA
RESTORE
™
EXTREME CONCRETE
Rust-Oleum Corporation Form: GDH-99
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 082415
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
PHYSICAL PROPERTIES .
EXTREME CONCRETE
Resin Type
Water-based Acrylic
Pigment Type
A Blend of Inorganic and Organic Pigments
NoneNone
Solvents
Glycol Ethers, Water
Weight
Per Gallon
12.8 lbs.
Per Liter
1.53 kg
Solids
By Weight
60%
By Volume
50%
Volatile Organic Compounds
<85 g/l (0.71 lbs./gal.)
Recommended Dry Film Thickness
(DFT) Per Coat
20 mils
Practical Coverage
at Recommended DFT
50-60 sq.ft./gal.
Consumption Rate
(2 coat application)
4 gallon pail: 100-120 square feet
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
2 hours
Recoat
3-6 hours
Foot Traffic
12 hours
Vehicle Traffic
7 days
Shelf Life
3-4 years
Flash Point
>200ºF (93ºC)
Safety Information
For additional information, see the SDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature
do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we
can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All
technical information is subject to change without notice.