Use and Care Manual

TECHNICAL DATA
RESTORE
®
4X DECK COAT
Rust-Oleum Corporation Form: GDH-443
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 030215
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
PHYSICAL PROPERTIES .
* Coverage is based on REQUIRED TWO THICK COATS
4X DECK COAT
Resin Type
Water-based Acrylic
Pigment Type
A blend of inorganic and organic pigments
Solvents
Glycol Ethers, Water
Weight
Per Gallon
11.6-11.9 lbs
Per Liter
1.39-1.43 kg
Solids
By Weight
66-69%
By Volume
53.4-54.4%
Volatile Organic Compounds
<50 g/l (0.42 lbs./gal.)
Recommended Dry Film Thickness
(DFT) Per Coat
4 mils
Practical Coverage
at Recommended DFT
Approximately 80 sq.ft./gal. (volume after tinting) Two coats are required.
Coverage Rate*
(2 coat application)
1 gallon: Up to 80 square feet
5 gallons: Up to 400 square feet
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
2-4 hours
Recoat
4-6 hours
Light Traffic
24 hours
Full Cure
3-4 weeks
Shelf Life
3 years
Flash Point
>200ºF (93ºC)
Storage
Protect from freezing
Safety Information
For additional information, see the MSDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature
do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we
can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All
technical information is subject to change without notice.