Manualshelf

Instructions / Assembly

ManualsBrandsRust-Oleum Restore ManualsPaint1 gal. 2X Chocolate Cool Touch Deck Stain
12345
RESTORE 2X One Coat Solid Stain with Cool Touch – Tips &
Application Instructions
Page 1 of 5
READ ALL INSTRUCTIONS BEFORE BEGINNING
For videos, information, and helpful tips on preparation, deck application, concrete application, and
maintenance; visit rustoleum.com/restore.
1. SURFACES
Wood: Restore 2X One Coat Solid Stain with Cool Touch should only be applied on structurally sound wood and
most composite surfaces. Some composite decking is engineered with moisture repellants or sealers that may
prevent proper adhesion. Be sure to follow specific manufacturer’s recommendation before applying to any
composite decking.
NOT FOR USE ON: Smooth or floated concrete, fiberglass, tile, and metal surfaces. These surfaces will not allow
for proper adhesion. Do not use on driveways, garages, or other areas with vehicular traffic.
2. NEW WOOD
New wood may be wet with chemicals or have mill glaze from the manufacturing process. New wood should age
for a minimum of 6 months before applying Restore 2X One Coat Solid Stain with Cool Touch. The lumber must dry
completely before applying the product to prevent peeling of the coating. The surface must also be properly
cleaned and prepared using Restore Deck & Concrete Cleaner to remove all foreign material and mill glaze prior to
application. Follow the PREPARATION instructions to be sure the Restore 2X One Coat Solid Stain with Cool Touch
adheres properly to the wood.
3. TINTING
Restore 2X One Coat Solid Stain with Cool Touch is available in two pre-tinted colors, Timberline and Chocolate.
THIS PRODUCT DOES NOT NEED TO BE TINTED AT THE STORE.
4. SURFACE TEMPERATURE REDUCTION
Restore 2X One Coat Solid Stain with Cool Touch reflects the sun’s rays to reduce the surface temperature up to
15° Fahrenheit compared with traditional solid stains of a similar color. Temperature reduction will vary based on
the ambient temperature, time of day, and the amount of direct sunlight on the surface.
5. COVERAGE
• One 1-gallon can of Restore 2X One Coat Solid Stain with Cool Touch will cover up to 250 square feet with
one coat.
• One 5-gallon bucket of Restore 2X One Coat Solid Stain with Cool Touch will cover up to 1,250 square feet
with one coat.
6. SURFACE PREPARATION FOR WOOD
Stop, Watch, and Roll: For more information and helpful tips watch the Preparation with the Restore Deck Start
Wood Primer and/or Preparation with Restore Deck Stripper videos.
READ ALL INSTRUCTIONS THOROUGHLY PRIOR TO BEGINNING.
REGADLESS OF AGE OR SURFACE CONDITION, FAILURE TO FOLLOW ONE OF THESE PREPARATION METHODS WILL
RESULT IN POOR ADHESION AND POSSIBLE COATING FAILURE. NEW AND SEALED WOOD DECKS NEED TO
WEATHER AT LEAST SIX MONTHS BEFORE APPLICATION.
METHOD 1: PREPARATION WITH RESTORE DECK START WOOD PRIMER (HIGHLY RECOMMENDED)

Summary of content (5 pages)