Use and Care Manual

TECHNICAL DATA
PRO FINISHER POLYURETHANE 350 VOC
Rust-Oleum Corporation Form: GDH-891
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 062215
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
PHYSICAL PROPERTIES .
OIL BASE POLYURETHANE 350 VOC
Resin Type
Oil modified Polyurethane
Pigments
NA
Solvents
Mineral Spirits
Weight
Per Gallon
7.89-8.33 lbs.
Per Liter
0.95-1.0 kg
Solids
By Weight
48.9-52.5%
By Volume
45.6-48.0%
Volatile Organic Compounds
350 g/l (2.92 lbs./gal.)
Recommended Dry Film Thickness
(DFT) per Coat
1.5 mils
(37.5µ)
Wet Film to Achieve DFT (unthinned
material)
3.0 mils
(75µ)
Theoretical Coverage at 1 mil DFT
(25µ)
834 sq.ft./gal.
Practical Coverage at Recommended
DFT (assumes 15% material loss)
500 sq.ft. /gal.
(Varies with surface porosity)
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
6 hours
Recoat
15-18 hours
Cure Time
24 Hours
50% Cure
48 Hours
75% Cure
7 Days
95% Cure
Shelf Life
3 years
Flash Point
93° F (34°C)
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature
do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we
can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All
technical information is subject to change without notice.