Use and Care Manual

TECHNICAL DATA
WATER BASE POLYURETHANE
Rust-Oleum Corporation Form: JPB-25
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 091913
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
PHYSICAL PROPERTIES .
Pro Finisher Water Base Polyurethane
Resin Type
Acrylic/Polyurethane
Pigments
NA
Weight - per Gallon
8.38-8.48 lbs.
per Liter
1.0- kg
Solids by Weight
28%
Solids by Volume
26.7%
Volatile Organic Compounds
<275 g/l
(<2.3 lbs./gal.)
Recommended Dry Film
Thickness (DFT) per Coat
1.0 mils
(25µ)
Wet Film to Achieve DFT
(unthinned material)
3.0- mils
(75µ)
Practical Coverage at
Recommended DFT
600-700 sq.ft./gal.
(Varies with surface porosity)
Dry Times at 77°F
(25°C) and 50%
Relative Humidity
Touch
1-2 hours
Foot Traffic
24 Hours
Cure Time
24 Hours
75%
48 Hours
90%
7 days
95%
Shelf Life
3 years
Flash Point
>220°F
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature
do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we
can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All
technical information is subject to change without notice.