Use and Care Manual

TECHNICAL DATA
SUPER GLAZE
Rust-Oleum Corporation Form: JPB-32
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 120613
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
.PHYSICAL PROPERTIES .
Resin Type
Epoxy Resin. Para-nonyl phenol. And polyamines
Weight*
Part A (Base)
9.57 lbs. /gal. - 1.15 kg/l
Part B (Activator)
7.94 lbs./gal - 0.95 kg/l
Solids
*
By Weight
Part A (Base)
100%
Part B (Activator)
100%
By Volume
Part A (Base)
100%
Part B (Activator)
100%
Volatile Organic Compounds*
<100 g/l (<0.84 Lbs/gal)
Mixing Ratio
1:1 Base to Activator (by volume)
Recommended Dry Film
Thickness (DFT) per Coat
1/16 inch / (62.5 mils.) / 1587 microns
Wet Film to Achieve DFT (Unthinned
material)
1/16 inch / (62.5 mils.) / 1587 microns
Theoretical Coverage at
1/16 inch
9 sq.ft./kit.
(0.84 m
2
/kit)
Pot Life @70ºF (21ºC)
and 50% Relative Humidity
20 – 25 minutes
Dry Times at 70-
80°F (21ºC) and 50%
Relative Humidity
Touch
4-5 hours
Full Cure
72 hours
Shelf Life
2 years
Flash Point
Base Component 294°F (146°C) – Activator Component 181°F (83°C)
Safety Information
FOR ADDITIONAL INFORMATION, SEE MSDS.
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.