Use and Care Manual

TECHNICAL DATA
PRO FINISHER UNIVERSAL SEALER
Rust-Oleum Corporation Form: GDH-888
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 062215
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
PHYSICAL PROPERTIES .
PRO FINISHER UNIVERSAL SEALER
Resin Type
Shellac
Pigments
NA
Solvents
Ethanol, Isopropyl Alcohol, Water
Weight
Per Gallon
7.2 lbs
Per Liter
0.86 kg
Solids
By Weight
22.5%
By Volume
16.1%
Volatile Organic Compounds
655 g/l (5.45 lbs./gal.)
Recommended Dry Film Thickness
(DFT) per Coat
0.5 mils
(12.5µ)
Wet Film to Achieve DFT (unthinned
material)
3.0mils
(75µ)
Practical Coverage at Recommended
DFT (assumes 15% material loss)
200-450 sq.ft./gal.
Depending on surface porosity and application method
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
10-45 minutes
Recoat
45 minutes
Shelf Life
3 years
Flash Point
55°F (13°C)
Safety Information
For additional information, see SDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature
do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we
can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All
technical information is subject to change without notice.