Use and Care Manual

TECHNICAL DATA
ULTRA COVER MULTI-PURPOSE SATIN BRUSH-ON PAINT
Rust-Oleum Corporation Form: GDH-1264
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 011317
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
.PHYSICAL PROPERTIES .
ULTRA COVER MULTI-PURPOSE SATIN BRUSH-ON PAINT
Resin Type
Styrene Acrylic Polymer
Pigment Type
Varies with Color, Limestone
Solvents
Water, Glycol Ethers
Weight
Per Gallon
9.0-10.0 lbs.
Per Liter
1.07-1.20 kg
Solids
By Weight
34.5-42.6%
By Volume
28.3-29.9%
Volatile Organic Compounds
<250 g/l (2.08 lbs./gal.)
Recommended Dry Film Thickness
(DFT) per Coat
1.0-1.5 mils
(25-37.5µ)
Wet Film to Achieve DFT (unthinned
material)
4.0-6.0 mils
(100-150µ)
Practical Coverage at Recommended
DFT (assumes 15% material loss)
120 sq.ft./qt.
(11.1m
2
/l)
Dry Times at 70-80°F
(21-27C) and 50%
Relative Humidity
Touch
30 minutes
Handle
1 hour
Recoat
2-4 hours
Dry Heat Resistance
200ºF (93ºC)
Shelf Life
5 years
Flash Point
>200°F (93°C)
Safety Information
For additional information, see SDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.