Use and Care Manual

TECHNICAL DATA
PT2X-10
PAINTER’S TOUCH
®
2X ULTRA COVER SATIN SPRAYS
1
Form: ARJ-1685
Rev.: 101718
DESCRIPTION AND USES
Rust-Oleum
®
Painter’s Touch
®
2X Ultra Cover Satin Sprays
contain technology that provides twice the coverage on
wood, metal, most plastic, wicker and more when compared
to other matching colors of Rust-Oleum general purpose
paints: Painter’s Touch, SPRAY N GO, Quick Color and
Touch ‘n tone. It covers surfaces with less spray passes,
allowing projects to be completed faster and easier. Any
angle spray feature allows you to spray in any direction,
even upside down. Fast Drying.
TIP: Some plastics made of polyethylene such as plastic
storage containers are manufactured in a way that may
hinder maximum paint adhesion. Test paint in a hidden area
first.
PRODUCTS
SKU
DESCRIPTION (Aerosol)
334080
Satin Wildflower Blue
346954
Satin Sweet Pea
334083
Satin Warm Caramel
334079
Satin Summer Squash
334078
Satin Paprika
334077
Satin Oregano
334076
Satin Nutmeg
334075
Satin Moss Green
334073
Satin Ivory Silk
334072
Satin Hunt Club Green
334071
Satin Heirloom White
334070
Satin Green Apple
334069
Satin Granite
334068
Satin French Lilac
334067
Satin Fossil
334066
Satin Espresso
334063
Satin Colonial Red
334062
Satin Claret Wine
334061
Satin Cinnamon
334059
Satin Aqua
346950
Satin Blossom White
346951
Satin Canyon Black
334091
Satin Midnight Blue
334086
Sating Stone Gray
346953
Satin London Gray
334065
Satin Eden
334060
Satin Aubergine
334074
Satin Lagoon
346950
Satin Blossom White
346951
Satin Canyon Black
346953
Satin London Gray
PRODUCTS (cont.)
SKU
DESCRIPTION (Aerosol)
334064
Sating Dark Walnut
334081
Satin Lemon Grass
334082
Satin Fire Orange
334085
Satin Oasis Blue
334084
Satin Poppy Red
334087
Satin Magenta
334092
Satin Smokey Beige
334088
Satin French Blue
334089
Satin Rustic Orange
334093
Satin Ink Blue
334095
Satin Seaside
334094
Satin Apple Red
334090
Satin Vintage Teal
334096
Satin Silver Lilac
PRODUCT APPLICATION
Use outdoors or in a well ventilated area such as an open
garage. Use when temperature is between 50-90ºF (10-
32ºC) and humidity is below 65% to ensure proper drying.
Do not use on objects that may exceed 200ºF (93ºC) surface
temperature. Do not apply to galvanized steel. Avoid
spraying in very windy and dusty conditions. Cover
surrounding area to protect from spray mist.
SURFACE PREPARATION
Remove all dirt, grease, oil, salt and chemical contaminants
by washing the surface with a commercial detergent, or other
suitable cleaning method. Rinse with fresh water and allow
to thoroughly dry. Remove loose paint and rust with a wire
brush or sandpaper. Previously coated surfaces must be
sound and in good condition. Smooth, hard, or glossy
finishes should be scarified by sanding to create a surface
profile.
WARNING! If you scrape, sand or remove old paint from any
surface, you may release lead paint dust. LEAD IS TOXIC.
EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS
ILLNESS, SUCH AS BRAIN DAMAGE; ESPECIALLY IN
CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID
EXPOSURE. Wear a NIOSH approved respirator to control
lead exposure. Clean up carefully with a HEPA vacuum and
a wet mop. Before you start, find out how to protect yourself
and your family by contacting the National Lead Information
Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead.