Instructions / Assembly

ITEMS
• Ultra Cover 2x Satin – Satin Heirloom White
• Lantern
• Tack Cloth
• Drop Cloth
• Painter’s Tape
1. PREPARE: Setup your workspace in a well-ventilated area and use a drop cloth
to protect from overspray. Tape o the glass in the lantern with painter’s tape to
protect it from paint.
2. PAINT: Shake your can of Ultra Cover 2x Satin spray paint in Satin Heirloom
White for one minute after the mixing ball starts to rattle. Then, hold the can
10-16” away from the lantern and spray in a steady back-and-forth motion.
Apply 2-3 light coats to the lantern, allowing a few minutes in between each coat.
Once the lantern is completely coated, set it aside to dry.
3. FINISH: Let your lantern dry completely for 24 hours. Once it’s dry, add a
battery-powered candle and display on your patio.
DIY SPRAY PAINTED PATIO LANTERN
Give any outdoor lantern a fresh new look with a few coats of Ultra Cover 2x spray paint.
This strikingly simple outdoor lantern will look great on any patio. Here’s how you
can make it in three steps.