Use and Care Manual

TECHNICAL DATA OKN-06
OKON SEAL & FINISH™
Rust-Oleum Corporation Form: GDH-902
11 Hawthorn Parkway Phone: [phone] Rev.: 122117
Vernon Hills, Illinois 60061 www.rustoleum.com
.PHYSICAL PROPERTIES .
OKON SEAL & FINISH
Resin Type
Acrylic Polymer
Color
Colorless
Solvents
Water
Weight
Per Gallon
8.40 lbs.
Per Liter
1.01 kg
Solids
Bt Weight
13%
By Volume
12.0%
Volatile Organic Compounds
<50 g/l (0.42 lbs./gal.)
Application Parameters
50-100°F (10-38°C) and <85% Relative Humidity
Practical Coverage Rate (sq.ft./gal.)
(assume 15% material loss)
Surface
1
st
Coat
2
nd
Coat
Rough (Broom Finish
150
250
Smooth (Float Finish)
200
300
Very-Smooth (Trowel Finish)
300
400
Dry Times at 70-80°F
(21-27ºC) and 50%
Relative Humidity
Recoat
3 hours or when dry to touch
Foot Traffic
12 hours
Protect From Rain
24 hours
Protect From Dew
12 hours
Shelf Life
3 Years
Flash Point
>200ºF (93ºC)
Safety Information
For additional information, see SDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.