Use and Care Manual

TECHNICAL DATA
OKN-02
OKON
®
S-40 WATER REPELLENT SEALER
FOR POROUS CONCRETE AND MASONRY
Rust-Oleum Corporation
11 Hawthorn Parkway
Vernon Hills, Illinois 60061
Phone: 847∙367∙7700
www.rustoleum.com
Form: GDH-571
Rev.: 120619
PHYSICAL PROPERTIES
OKON S-40
Resin Type
Silane/Siloxane
Color
Colorless
Solvents
Water
Weight
Per Gallon
8.41 lbs.
Per Liter
1.0 kg
Solids
By Weight
9%
By Volume
10.5%
Volatile Organic Compounds
<50 g/l (0.42 lbs./gal.)
Application Parameters
45°F to 90°F (7°C to 32°C) <85% Relative Humidity
Practical Coverage Rate
(assumes 15% material loss)
COVERAGE
VERTICAL
HORIZONTAL
1st Coat
40-60 sq.ft./gal.
100-150 sq.ft./gal.
2nd Coat
60-100 sq.ft./gal.
100-150 sq.ft./gal.*
Dry Times at 70-80°F
(21-27ºC) and 50%
Relative Humidity
Recoat
Wet-on-wet, if required
Foot Traffic
8 hours
Vehicle Traffic
24 hours
Protect From Rain
12 hours
Shelf Life
12 months unopened in protected storage
Flash Point
>200°F (93°C)
Safety Information
For additional information, see SDS
*A second coat is not required on dense surfaces.
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.