Instructions / Assembly
    TECHNICAL DATA  ROC-30 
OUTDOOR FABRIC 
  WATER REPELLING TREATMENT 
          Form: GDH-319 
            Rev.:  041114 
1 
.DESCRIPTION AND USES   . 
Rust-Oleum
®
 NeverWet
™
 Outdoor Fabric is a one-step, 
superhydrophobic, water repelling treatment designed to 
keep items dry longer. This crystal clear formula allows 
fabrics to breathe, while dramatically repelling water from 
the surface. NeverWet Outdoor Fabric preserves outdoor 
items against damaging moisture without changing the 
look or feel of the fabric. 
NeverWet Outdoor Fabric is ideal for use on leather, 
suede, polyester, cotton/polyester blends and canvas 
fabrics. It is suitable for use on shoes, patio furniture, 
backpacks, gloves, camping gear and more. 
. FEATURES                                                    . 
  Repels water 
  Breatheable 
  Invisible protection 
.PRODUCTS                                                    . 
SKU    Description       
278146    NeverWet Outdoor Fabric 
.SPRAYING CONDITIONS                                  . 
Use outdoors or in a well ventilated area. Use when 
temperature is above 50ºF (10ºC) and humidity is below 
85% to ensure proper drying. Avoid spraying in very windy 
and dusty conditions. Cover surrounding area to protect 
from spray mist. 
.PRODUCT APPLICATION                              . 
SURFACE PREPARATION 
Surfaces must be clean and dry. 
.PRODUCT APPLICATION (cont.)                  .
APPLICATION 
Do not shake. A test spray is recommended to obtain a 
feel for the spray pattern. Test in an inconspicuous area 
before application for colorfastness. NeverWet Outdoor 
Fabric may enrich light material with a slightly darker tone. 
Rotate nozzle to “ON” position. Hold the spray bottle 12-
16” from surface and coat the entire object until wet. Do 
not soak or allow to puddle. NOTE: If bubbles appear, 
lightly dab with a clean, lint-free rag. Re-apply seasonally 
or when needed. Do not use near open flame. 
DRY & RECOAT  
Dry and recoat times are based on 70ºF and 50% relative 
humidity and will vary depending of the fabric. The coating 
will be odorless when dry. Allow to dry for 24 hours before 
exposing to water. 
REMOVAL 
If you wish to remove the NeverWet fabric treatment, 
scrub the coated area with soap and water until the 
superhydrophobic effect is gone. 
CLEAN-UP 
When finished spraying, wipe off tip before storing. 
Properly discard empty container. 


