Use and Care Manual

TECHNICAL DATA
ROC-173
RUST-OLEUM
®
HOME
FLOOR COATING KITS
Rust-Oleum Corporation
11 Hawthorn Parkway
Vernon Hills, Illinois 60061
Phone: [phone]
www.rustoleum.com/rohome
Form: ARJ-1992
Rev.: 031920
PHYSICAL PROPERTIES
STEP 1 BASE COAT
STEP 2 TOP COAT
CLEANER
Resin Type/Composition
Water-based Styrene
Acrylic
Water-based Urethane
Acrylic
Proprietary Blend of
Biodegradable Surfactants,
Detergents and Emulsifiers
pH
NA
NA
<12.2
Pigment
Varies with color
Aluminum Oxide, Silica
NA
Solvent
Water, Propylene Glycol
Water, Glycol Ethers
NA
Weight
Per Gallon
10.1-10.6 lbs.
8.63-8.69 lbs
NA
Per Liter
1.2-1.3 kg
1.03-1.04 kg
NA
Solids
By Weight
47.2-51.2%
29.2-29.3%
NA
By Volume
36.0-37.3%
27.3-27.6%
NA
Volatile Organic Compounds
<50 g/l
<50 g/l
0%
Recommended Dry Film Thickness
(DFT) Per Coat
1.5-2.0 mils
1.0-1.5 mils
NA
Wet Film Thickness (WFT) to Achieve
DFT
4.0-5.0 mils
4.0-4.5 mils
NA
Practical Coverage at Recommended
DFT
75-100 sq.ft./kit
Coverage will vary depending on surface porosity and texture
Dry Times @ 77º F
(25°C) and 50%
Relative Humidity
Touch
30-60 minutes
1 hour
NA
Recoat/Topcoat
6 hours
2 hours
NA
Foot Traffic
6 hours
24 hours
NA
Normal Use
NA
72 hours
NA
Full Cure
7 days
NA
Flash Point
>200°F (93°C)
Non-Flammable
Shelf Life
2 years
NA
Safety Information
For additional information, see SDS
Calculated values are shown and may vary from the actual manufactured material.
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.