Use and Care Manual

TECHNICAL DATA
FLEXIDIP
™
GLOSS TOP COAT
Rust-Oleum Corporation Form: GDH-574
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 111214
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
PHYSICAL PROPERTIES .
FLEXIDIP GLOSS TOP COAT
Resin Type
Synthetic Rubber
Pigment Type
NA
Solvents
Heptane, Methyl Ethyl Ketone, Mineral Spirits, VM&P Naphtha, Xylene
MIR
1.50 Max
Fill Weight
11 ounces
Recommended Dry Film
Thickness (DFT) Per Coat
0.25-0.50 mils per coat
(6-12µ)
Practical Coverage
at Recommended DFT
9-10 sq.ft./can
(0.8-0.9 m
2
/can)
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
20 minutes
Handle
1 hour
Recoat
30 minutes
Dry Heat Resistance
200°F (93°C)
Shelf Life
5 years
Flash Point
-156°F (-104°C)
Safety Information
For additional information, see MSDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature
do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we
can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All
technical information is subject to change without notice.