Use and Care Manual

TECHNICAL DATA ESH-01
EPOXYSHIELD
®
ANTI-SKID ADDITIVE
Rust-Oleum Corporation Form: GDH-353
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 091914
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
.DESCRIPTION AND USES .
EpoxyShield
®
Anti-Skid Additive is an aluminum oxide
based anti-skid additive designed to provide skid
resistance when added to epoxy, latex or oil based paints
or stains for concrete, wood, metal or fiberglass. Anti-Skid
Additive will not change the performance or properties of
the coatings when added at the recommended level.
PRODUCTS .
SKU Description
279847 Anti-Skid Additive
APPEARANCE .
Sand-like particles
PACKAGING .
8 ounce package (227 grams)
.PRODUCT APPLICATION .
MIXING
For one part floor coatings: Add one package for each
gallon of coating just prior to application. Pour the additive
in slowly, while stirring and mix thoroughly until the
additive is evenly dispersed.
For two part floor coatings: Premix both components to
redisperse any settled particles; then add the activator to
the base. If there is an induction time for the product, allow
the coating to stand the recommended amount of time.
Then pour the additive in slowly, while stirring and mix
thoroughly until the additive is evenly dispersed.
APPLICATION
Apply the coating as normal. Remix the paint in the can
Several times during use to ensure that any settled Anti-
Skid Additive is re-incorporated into the coating. If
applying more than one coat of paint, mix the Epoxy
Shield Anti-Skid Additive into the final coat only.
.PHYSICAL PROPERTIES .
ANTI-SKID ADDITIVE
Composition
Aluminum Oxide
Weight
Per Gallon
33.0 lbs.
Per Liter
3.95 kg
Solids
By Weight
100%
By Volume
100%
Volatile Organic Compounds
0 g/l
Shelf Life
Unlimited
Safety Information
For additional information, see MSDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.