Specification

TECHNICAL DATA ESH-09
EPOXYSHIELD
®
WATER-BASED EPOXY
GARAGE FLOOR COATING
Form: GDH-356
Rev.: 012915
2
If temp is 60-70
°
F (16-21
°
C)
Allow product to stand after mixing
Start brushing (trimming edges): 30 minutes after mixing
Start rolling: 45 minutes after mixing
Use all mixed product within (pot life): 2 hours after mixing
Best time to paint is mid-afternoon (after 1 PM) to ensure best curing conditions and maximum pot life.
If temp is 71-80
°
F (22-27
°
C)
Allow product to stand after mixing
Start brushing (trimming edges): 10 minutes after mixing
Start rolling: 15 minutes after mixing
Use all mixed product within (pot life): 1.5 hours after mixing
Best time to paint is early morning (before 9 AM) to ensure best curing conditions and maximum pot life.
If temp is 81-85
°
F (27-29
°
C)
Start brushing (trimming edges): Immediately after mixing
Start rolling: 5-15 minutes after mixing
Use all mixed product within (pot life): 1 hour after mixing
Best time to paint is early morning (before 9 AM) to ensure best curing conditions and maximum pot life.