Use and Care Manual

TECHNICAL DATA
EPOXYSHIELD
®
BLACKTOP PATCH & CRACK FILLER
Rust-Oleum Corporation Form: GDH-55
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 050313
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
.PHYSICAL PROPERTIES .
BLACKTOP PATCH & CRACK FILLER
Resin Type
NA
Pigment Type
Powder
Solvents
Add Water
Weight
Per Gallon
NA
Per Liter
NA
Solids
By Weight
NA
By Volume
NA
Volatile Organic Compounds
NA
Recommended Dry Film
Thickness (DFT) per Coat
NA
Wet Film to Achieve DFT (Unthinned
material)
NA
Theoretical Coverage at
1 mil DFT (25µ)
NA
Practical Coverage at
Recommended DFT (assume 15%
material loss)
Approximately 2 sq. ft.
½” deep per tub
Dry Times at 70°F
(21ºC) and 50%
Relative Humidity
Walk/ Drive
Ready
24 hours
Shelf Life
1 year
Flash Point
NA
Safety Information
For additional information, see MSDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.