MSDS

Respiratory Protection: A respiratory protection program that meets OSHA 1910.134 and ANSI Z88.2 requirements
must be followed whenever workplace conditions warrant a respirator's use.
Skin Protection: Use gloves to prevent prolonged skin contact.
Eye Protection: Wear safety glasses with side shields (or goggles) and a face shield.
Other protective equipment: Refer to safety supervisor or industrial hygienist for further information regarding
personal protective equipment and its application.
Hygienic Practices: Wash thoroughly with soap and water before eating, drinking or smoking.
(See section 16 for abbreviation legend)
Conditions To Avoid: Avoid contact with strong acid and strong bases.
Incompatibility: Not applicable for this product. Avoid contact with water.
Hazardous Decomposition: May produce hazardous fumes when heated to decomposistion as in welding. Fumes
may contain: carbon monoxide, carbon dioxide, chlorine, hydrogen chloride and possible cyanide and MDI.
Hazardous Polymerization: Will not occur under normal conditions
Stability: Stable under normal conditions
Section 9 - Physical And Chemical Properties
Boiling Range:
N.A.
-
N.A. F
Vapor Density:
N.A.
Odor:
Not Applicable
Odor Threshold:
ND
Appearance:
Powder
Evaporation Rate:
N.A.
Solubility in H2O:
Slight
Freeze Point:
N.D.
Specific Gravity:
3.500
Vapor Pressure:
ND
PH:
N.E.
Physical State:
Solid
Section 10 - Stability And Reactivity
Section 11 - Toxicological Information
Product LD50: N.D. Product LC50: N.D.
Chemical Name
LD50
LC50
Potland Cement
N.D.
N.D.
Crystalline Silica
ND
ND
Calcium Sulfate
N.D.
N.D.
Titanium Dioxide
>7500 mg/kg (ORAL, RAT)
N.D.
Section 12 - Ecological Information
Page
3
of
5
245065 Concrete Resurfacer Kit Mortar Mix