MSDS

Date Printed: 5/8/2015
STORAGE: Keep containers tightly closed. Isolate from heat, electrical equipment, sparks and open flame. Keep away from heat,
sparks, flame and sources of ignition. Keep container closed when not in use. Contents under pressure. Do not store above 120 ° F.
Store large quantities in buildings designed and protected for storage of NFPA Class I flammable liquids. Product should be stored in
tightly sealed containers and protected from heat, moisture, and foreign materials. Store in a dry, well ventilated place. Keep
container tightly closed when not in use. Avoid excess heat.
8. Exposure Controls/Personal Protection
Chemical Name CAS-No.
Weight %
Less Than
ACGIH TLV-
TWA
ACGIH TLV-
STEL
OSHA PEL-TWA
OSHA PEL-
CEILING
Limestone 1317-65-3 35.0
15 mg/m3 (Total
Dust, OSHA)
N.E.
5 mg/m3
(Respirable Dust)
N.E.
Bisphenol A Epoxy Resin 25085-99-8 20.0 N.E. N.E. N.E. N.E.
Hydrous Magnesium Silicate 14807-96-6 15.0
2 mg/m3
(Respirable
Dust)
N.E.
20 mppcf
(Mineral Dust
<1% Quartz)
N.E.
Polyamide Resin 68424-41-9 15.0 N.E. N.E. N.E. N.E.
Xylene (mixed isomers) 1330-20-7 10.0 100 ppm 150 ppm 100 ppm N.E.
n-Butanol 71-36-3 5.0 N.E. 20 ppm 100 ppm N.E.
Barium Sulfate 7727-43-7 5.0
5 mg/m3
(Inhlalable
fraction w/o
asbestos and
<1% cryst.silica)
N.E.
15 mg/m3 [Total
Dust]
N.E.
Ethylbenzene 100-41-4 5.0 20 ppm 125 ppm 100 ppm N.E.
Titanium Dioxide 13463-67-7 5.0
10 mg/m3 (Total
Dust)
N.E.
15 mg/m3 [Total
Dust]
N.E.
4-nonylphenol, branched 84852-15-3 5.0 N.E. N.E. N.E. N.E.
Methyl Isobutyl Ketone 108-10-1 5.0 20 ppm 75 ppm 100 ppm N.E.
Titanium Dioxide 1317-80-2 1.0 10 mg/m3 N.E.
15 mg/m3 (Total
Dust)
N.E.
Polyvinyl Acetate Resin PROPRIETARY 1.0 N.E. N.E. N.E. N.E.
PERSONAL PROTECTION
ENGINEERING CONTROLS: Use process enclosures, local exhaust ventilation, or other engineering controls to control airborne
levels below recommended exposure limits. Prevent build-up of vapors by opening all doors and windows to achieve cross-
ventilation. Use explosion-proof ventilation equipment. Provide general dilution of local exhaust ventilation in volume and pattern to
keep TLV of hazardous ingredients below acceptable limits.
RESPIRATORY PROTECTION: A respiratory protection program that meets OSHA 1910.134 and ANSI Z88.2 requirements must be
followed whenever workplace conditions warrant a respirator's use. A NIOSH/MSHA approved air purifying respirator with organic
vapor cartridge or canister may be permissible under certain circumstances where airborne concentrations are expected to exceed
exposure limits.
SKIN PROTECTION: Use impervious gloves to prevent skin contact and absorption of this material through the skin. Nitrile or
Neoprene gloves may afford adequate skin protection. Use gloves to prevent prolonged skin contact.
EYE PROTECTION: Use safety eyewear designed to protect against splash of liquids.
OTHER PROTECTIVE EQUIPMENT: Refer to safety supervisor or industrial hygienist for further information regarding personal
protective equipment and its application. Refer to safety supervisor or industrial hygienist for further guidance regarding types of
personal protective equipment and their applications.
HYGIENIC PRACTICES: Wash thoroughly with soap and water before eating, drinking or smoking. Remove contaminated clothing
immediately and launder before reuse.
Page 4 / 8