MSDS

Date Printed: 5/1/2015
P420 Store away from other materials.
P411+P235 Store at temperatures not exceeding …°C / …°F. Keep cool.
P201 Obtain special instructions before use.
P308+P313 IF exposed or concerned: Get medical advice/attention.
P314 Get medical advice/attention if you feel unwell.
P302+P350 IF ON SKIN: Gently wash with plenty of soap and water.
3. Composition/Information On Ingredients
HAZARDOU S SU BSTANCES
Chem ica l N a m e CAS-No. Wt.%
Range
GHS Sym bols
GHS Sta tem e n ts
1-Methoxy-2-propyl acetate 25-50 GHS02-GHS06 H226-310108-65-6
Toluene
25-50
GHS02-GHS07-
GHS08
H225-302-332-361-336-373-31
5
108-88-3
Stoddard Solvent 1.0-2.5 GHS02-GHS08 H224-340-350-3728052-41-3
Xylene (mixed isomers) 1.0-2.5 GHS02-GHS07 H226-312-332-315
1330-20-7
Aluminum Flake 1.0-2.5 GHS02 H228-2617429-90-5
Carbon Black 0.1-1.0 GHS02 H251
1333-86-4
Ethylbenzene 0.1-1.0 GHS02-GHS07 H225-332100-41-4
The text for GHS Hazard Statements shown above (if any) is given in the "16. Other Information" section.
4. First-aid Measures
FIR ST AID - EYE CON TACT: Immediately flush eyes with plenty of water for at least 15 minutes holding eyelids open. Get
medical attention. Do NOT allow rubbing of eyes or keeping eyes closed.
FIR ST AID - SKIN CON TACT: Wash skin with soap and water. Remove contaminated clothing. Get medical attention if irritation
develops or persists.
FIR ST AID - IN H AL ATION: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Get immediate medical attention. Do NOT use mouth-to-mouth resuscitation. If you experience difficulty in breathing, leave the
area to obtain fresh air. If continued difficulty is experienced, get medical assistance immediately.
FIR ST AID - IN GESTION : Aspiration hazard: Do not induce vomiting or give anything by mouth because this material can enter
the lungs and cause severe lung damage. Get immediate medical attention. If swallowed, get medical attention.
5. Fire-fighting Measures
EXTIN GUISH ING M EDIA:
Alcohol Film Forming Foam, Carbon Dioxide, Dry Chemical, Dry Sand, Water Fog
UNUSU AL FIRE AN D EXPLOSION H AZAR D S: No unusual fire or explosion hazards noted. Closed containers may explode
when exposed to extreme heat due to buildup of steam. Keep containers tightly closed. Isolate from heat, electrical equipment,
sparks and open flame.
SPECIAL FIREFIGH TIN G PR OCEDURES: Water may be used to cool closed containers to prevent pressure buildup and
possible autoignition or explosion. Evacuate area and fight fire from a safe distance. Use water spray to keep fire-exposed
containers cool. Containers may explode when heated.
6. Accidental Release Measures
STEPS TO BE TAKEN IF M ATERIAL IS R ELEASED OR SPIL L ED: Remove all sources of ignition, ventilate area and
remove with inert absorbent and non-sparking tools. Dispose of according to local, state (provincial) and federal regulations. Do
not incinerate closed containers. Ventilate area, isolate spilled material, and remove with inert absorbent. Dispose of contaminated
absorbent, container, and unused contents in accordance with local, state, and federal regulations.
7. Handling and Storage
Page 3 / 8