MSDS

GM60007A AUTORF 6PK MARKER BRIGHT RED Page 3 of 5
3
circumstances where airborne concentrations are expected to exceed exposure limits.
Protection provided by air purifying respirators is limited. Use a positive pressure air supplied respirator if there is
any potential for an uncontrolled release, exposure levels are not known, or in any other circumstances where air
purifying respirators may not provide adequate protection.
Skin Protection: Use impervious gloves to prevent skin contact and absorption of this material through the skin.
Nitrile or Neoprene gloves may afford adequate skin protection.
Eye Protection: Use safety eyewear designed to protect against splash of liquids.
Other protective equipment: Refer to safety supervisor or industrial hygienist for further information regarding
personal protective equipment and its application.
Hygienic Practices: Wash thoroughly with soap and water before eating, drinking or smoking.
Section 9 – Physical and Chemical Properties
Vapor Density
Heavier than Air
Odor:
Solvent Like
Appearance:
Liquid
Evaporation Rate:
Slower than Ether
Solubility in Water:
Slight
Freeze Point:
N.D.
Specific Gravity:
0.97
pH:
N.A.
Physical State:
Liquid
Section 10 – Stability and Reactivity
Conditions To Avoid: Avoid all possible sources of ignition.
Incompatibility: Incompatible with strong oxidizing agents, strong acids and strong alkalies.
Hazardous Decomposition: When heated to decomposition, it emits acrid smoke and irritating fumes. By open
flame, carbon monoxide and carbon dioxide.
Hazardous Polymerization: Will not occur under normal conditions.
Stability: This product is stable under normal storage conditions.
Section 11 – Toxicological Information
Chemical Name
LD
50
LC
50
PM Acetate
N.D.
N.D.
Toluene
636 mg/kg (Rat, Oral)
>26700 ppm (Rat, Inhalation, 1Hr)
B48S Acrylic Resin Solids N.D.
N.D
Methyl Methacrylate Resin 7872 mg/kg (Oral, Rat)
N.D.