Use and Care Manual

TECHNICAL DATA
ATO-135
RUST-OLEUM
®
VINYL WRAP
Rust-Oleum Corporation
11 Hawthorn Parkway
Vernon Hills, Illinois 60061
Phone: 866∙585∙8430
www.rustoleum.com/automotive
Form: ARJ-1972
Rev.: 012320
PHYSICAL PROPERTIES
VINYL WRAP
Resin Type
VINYL
Solvents
Blend of Glycol Ethers, Acetates and Ketones
MIR
1.60 Max
Fill Weight
11 oz.
Practical Coverage Rate
2-4 sq. ft./can
Dry Times at 77°F
(25ºC) and 50%
Relative Humidity*
Touch
30 minutes
Handle
2 hours
Recoat
Within 30 minutes
Shelf Life
2 years
Dry Heat Resistance
200°F (93°C)
Flash Point
-156°F (-104°C)
Safety Information
See SDS
Calculated values are shown and may vary slightly from the actual manufactured material.
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.