Manualshelf

Use and Care Manual

ManualsBrandsRust-Oleum Automotive ManualsAutomotive Paint10 oz. Gloss Blue Custom Chrome Spray Paint (6-Pack)
12
TECHNICAL DATA
RCS-06
RUST-OLEUM
®
CUSTOM
PREMIUM CHROME PAINT
1
DESCRIPTION AND USES
Rust-Oleum
®
Custom Automotive Paint is a premium
automotive lacquer designed to give an on-trend, chrome
finish. Colored Chrome sheen provides extra shine and
luster to automotive accent projects like interiors, wheels and
striping. Colored Chrome creates a chrome effect without a
base coat on smooth surfaces.
PRODUCTS
SKU
DESCRIPTION (Aerosol)
340558
Chrome Silver
340561
Chrome Red
343346
Chrome Black
PRODUCT APPLICATION
SURFACE PREPARATION
Sanding is not recommended. Thoroughly clean any surface
dirt or contaminants, including finger smudges, with soap and
water. Rinse and let dry.
PRIMING
Use of Gloss Primer provides added corrosion protection,
better adhesion and hiding. It is especially recommended for
porous surfaces and bare metal. Use of a Matte Primer will
lessen chrome effect.
PRODUCT APPLICATION (cont.)
APPLICATION
Use outdoors or in a well-ventilated area such as an open
garage. Use when temperature is between 50°F and 90°F
(10°-32° C) and humidity is below 65% to ensure proper
drying. Do not apply to surfaces that, when heated, exceed
200°F (93°C) or galvanized metal. Avoid spraying in very
windy, dusty conditions. Cover surrounding area to protect
from spray mist
Shake can vigorously for one minute after mixing ball begins
to rattle. If the mixing ball fails to rattle, DO NOT STRIKE.
Contact Rust-Oleum. Shake often during use. Hold can
upright 10-16" from surface and spray in a steady back-and-
forth motion, slightly overlapping each stroke. Keep the can
the same distance from the surface. Keep the can in motion
while spraying. Apply several light coats a few minutes
apart. For matte surfaces, more coats are recommended.
Do not use near open flame.
DRY AND RECOAT
Dry and recoat times are based on 70°F and 50% relative
humidity. Allow more time at cooler temperatures. Dries to
touch in 20 minutes, to handle in 1 hour, fully dry in 24
hours. Apply a second coat any time. Apply Universal high
gloss clear top coat for maximum durability.
CLEAN UP
When finished spraying, clear spray valve by turning can
upside down and pushing spray button for 5 seconds. Clean
up wet paint with xylol or acetone. Throw away empty can in
trash pickup. Do not burn or place in home trash compactor.
CLOGGING
If valve clogs, twist and pull off spray tip and rinse it in a
solvent such as acetone. Do not stick a pin or other objects
into the stem.

Summary of content (2 pages)