Use and Care Manual

TECHNICAL DATA
PROFESSIONAL GRADE TRUCK BED LINER KIT
Rust-Oleum Corporation Form: GDH-39
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 042913
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
. PHYSICAL PROPERTIES .
TRUCK BED LINER KIT
Resin Type
Epoxy Amine
Pigment Type
Carbon Black
Solvents
Hi Sol 10, N-Butyl Alcohol, Toluene, Xylene
Weight*
Per Gallon
10.65 lbs.
Per Liter
1.28 kg
Solids*
By Weight
68.6%
By Volume
53.2%
Volatile Organic Compounds*
400 g/l
(3.33 lbs./gal.)
Mixing Ratio
4:1 (Base to Activator by volume)
Recommended Dry Film
Thickness (DFT) Per Coat
NA
Wet Film to Achieve DFT
(unthinned material)
NA
Theoretical Coverage at 1 mil
DFT (25µ)
853 sq.ft./gal.
(21.0 m
2
/l)
Practical Coverage at Recommended
DFT (assumes 15% material loss)
Approximately 180-200 sq.ft./gal.
(Standard full size pick-up truck)
Induction Period
15 minutes
Pot Life
3-4 hours
Dry Times at
70°F (21°C)
and 50%
Relative
Humidity
Light Duty
24-48 hours
Recoat
15 minutes
Full Cure
7 days
Shelf Life
2 years
Flash Point
65°F (18°C) Part A Base
115°F (45°C) Part B Activator
Safety Information
For additional information, see MSDS
*Activated material
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.