Use and Care Manual

TECHNICAL DATA
AUTOMOTIVE UNIVERSAL TOUCH-UP AEROSOLS
Rust-Oleum Corporation Form: GDH-1232
11 Hawthorn Parkway Phone: [phone] Rev.: 111716
Vernon Hills, IL 60061 www.rustoleum.com
An RPM Company
PHYSICAL PROPERTIES .
AUTOMOTIVE UNIVERSAL TOUCH-UP AEROSOLS
Resin Type
Modified Acrylic
Pigment Type
Varies with Color
Solvents
Acetone, Acetates, and Aromatic Hydrocarbons
MIR
1.25 Max
Fill Weight
11 ounces
Recommended Dry Film Thickness
(DFT) per Coat
1.5-2.5 mils
(37.5-62.5µ)
Practical Coverage at
Recommended DFT
14-16 sq.ft./can
(1.3-1.5 m
2
/can)
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
30 minutes
Recoat
Within 2 hours or after 48 hours
Fully Dry
48 hours
Dry Heat Resistance
200°F (93°C)
Shelf Life
3 years
Flash Point
-156°F (-104°C)
Safety Information
For additional information, see SDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature
do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we
can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All
technical information is subject to change without notice.