Use and Care Manual

TECHNICAL DATA
ATO-81
RUST-OLEUM
®
AUTOMOTIVE
PEEL COAT
®
Rust-Oleum Corporation
11 Hawthorn Parkway
Vernon Hills, Illinois 60061
Phone: 866∙585∙8430
www.rustoleum.com/automotive
Form: GDH-285
Rev.: 043018
PHYSICAL PROPERTIES
PEEL COAT
Resin Type
Styrene Blocked Copolymer
Pigment Type
Varies with color
Solvents
Blend of Acetates, Methyl Ethyl Ketone, Naphtha
MIR
1.60 max
Fill Weight
11 oz.
Recommended Dry Film Thickness (DFT)
Per Coat
0.5-1.0 mils (12.5-25µ)
Practical Coverage at Recommended DFT
8 sq.ft./can (0.75 m
2
/can)
Dry times at 77°F
(25°C) and 50%
Relative Humidity
Touch
20 minutes
Handle
1 hour
Recoat
20 minutes
Shelf Life
5 years
Dry Heat Resistance
200°F
Flash Point
-156°F
Safety Information
For Additional Information, See SDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.