Use and Care Manual

TECHNICAL DATA
PEEL STOP –
AUTO INTERIOR WATER REPELLING TREATMENT
Rust-Oleum Corporation Form: GDH-380
11 Hawthorn Parkway Phone: 877•385-8155 Rev.: 062414
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
.PHYSICAL PROPERTIES .
AUTO INTERIOR WATER REPELLING TREATMENT
Resin Type
Acrylic
Pigment Type
NA
Solvents
Water
Weight
Per Gallon
8.44 lbs.
Per Liter
1.01 kg
Fill Weight
11 ounces
VOC
64 g/l (0.53 lbs./gal.)
Practical Coverage at
Recommended DFT (assumes 15%
material loss)
Coverage will vary depending on fabric
50 sq.ft. on smooth/light fabrics; 20 sq.ft. on textured/heavy fabrics
Dry Times at 70-80ºF
(21-27ºC) and 50%
Relative Humidity
Touch
Varies depending on fabric
Handle
Varies depending on fabric
Full Cure
Allow to dry 24 hours before exposing to liquids
Shelf Life
2 years
Flash Point
212°F (100°C)
Safety Information
For additional information, see MSDS.
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.