Use and Care Manual

ManualsBrandsRust-Oleum Automotive ManualsPaint11 oz. Auto Interior Fabric Spray Paint

TECHNICAL DATA ROC-33

AUTO INTERIOR

WATER REPELLING TREATMENT

Form: GDH-380

Rev.: 062414

.DESCRIPTION AND USES .

Rust-Oleum

NeverWet

Auto Interior is a one-step,

superhydrophobic, liquid repelling treatment designed to

keep automobile fabrics dry longer. This crystal clear

formula allows fabrics to breathe, while dramatically

repelling liquids from the surface. NeverWet Auto Interior

protects fabrics against damaging liquids and stains

without changing the look or feel.

NeverWet Auto Interior is ideal for use on leather, cloth,

and synthetic & natural fibers. It is suitable for use on

automotive upholstery, floor mats, carpets and car seats.

. FEATURES .

 Repels liquids and stains

 Breatheable

 Invisible protection

.PRODUCTS .

SKU (11 ounce spray) Description

280884 NeverWet Auto Interior

.SPRAYING CONDITIONS .

Use outdoors or in a well ventilated area. Open all car

doors during application. Use when temperature is above

50ºF (10ºC) and humidity is below 85% to ensure proper

drying. Avoid spraying in very windy and dusty conditions.

.PRODUCT APPLICATION .

SURFACE PREPARATION

Apply to a clean, dry surface.

.PRODUCT APPLICATION (cont.) .

APPLICATION

Do not shake. A test spray is recommended to obtain a

feel for the spray pattern. Test in an inconspicuous area

before application for colorfastness. NeverWet Auto

Interior may enrich light materials with a slightly darker

tone. NeverWet Auto Interior is odorless when dry. Rotate

nozzle to “ON” position. Spray coating 12-16” from the

surface; coating the entire object until wet. Do not soak or

allow to puddle. NOTE: If bubbles appear, lightly dab with

a clean, lint-free rag. Re-apply periodically or when

needed.

DRY & RECOAT

Dry and recoat times are based on 70ºF and 50% relative

humidity and will vary depending on fabric on the

automotive interior. Allow to dry for 24 hours before

exposing to liquids.

COVERAGE

Coverage will vary depending on the fabric: 50 square feet

on smooth/light fabrics to 20 square feet on

textured/heavy fabrics.

CLEAN-UP

When finished spraying, wipe off tip before storing.

Properly discard empty container.

Summary of content (2 pages)

PAGE 1
TECHNICAL DATA ROC-33 AUTO INTERIOR WATER REPELLING TREATMENT .DESCRIPTION AND USES ® . .PRODUCT APPLICATION (cont.) ® APPLICATION Rust-Oleum NeverWet Auto Interior is a one-step, superhydrophobic, liquid repelling treatment designed to keep automobile fabrics dry longer. This crystal clear formula allows fabrics to breathe, while dramatically repelling liquids from the surface. NeverWet Auto Interior protects fabrics against damaging liquids and stains without changing the look or feel.
PAGE 2
PEEL STOP – AUTO INTERIOR WATER REPELLING TREATMENT TECHNICAL DATA .PHYSICAL PROPERTIES . AUTO INTERIOR WATER REPELLING TREATMENT Resin Type Acrylic Pigment Type NA Solvents Water Per Gallon 8.44 lbs. Per Liter 1.01 kg Weight Fill Weight 11 ounces VOC 64 g/l (0.53 lbs./gal.) Practical Coverage at Recommended DFT (assumes 15% material loss) Dry Times at 70-80ºF (21-27ºC) and 50% Relative Humidity Coverage will vary depending on fabric 50 sq.ft. on smooth/light fabrics; 20 sq.ft.