Use and Care Manual

TECHNICAL DATA
FABRIC & VINYL
Rust-Oleum Corporation Form: GDH-369
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 052014
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
PHYSICAL PROPERTIES .
FABRIC & VINYL
Resin Type
Polyurethane
Pigment Type
Black - Organic
Sand - Organic/Inorganic
Solvents
N-methyl Pyrrolidone, Glycol Ether EP
Weight
Per Gallon
8.8 lbs.
9.4 lbs.
Per Liter
1.05 kg
1.13 kg
Solids
By Weight
31.3%
37.2%
By volume
27.3%
28.9%
Volatile organic Compounds
<250 g/l (2.08 lbs./gal.)
Recommended Dry Film
Thickness (DFT) Per Coat
0.5 mils (12.5µ)
Wet Film to Achieve DFT
2.0 mils (50µ)
Practical Coverage
at Recommended DFT
13 sq.ft./4 fl. oz.
14 sq.ft./4 fl. oz.
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
15 minutes
Handle
30 minutes
Recoat
1 hour
Full Cure
24 hours
Dry Heat Resistance
250°F (121°C)
Shelf Life
6 months
Flash Point
>200°F (93°C)
Safety Information
For additional information, see MSDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature
do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we
can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All
technical information is subject to change without notice.