Use and Care Manual

ManualsBrandsRust-Oleum Automotive ManualsPaint4 oz. Black Vinyl and Fabric Sponge Applicator (6-Pack)

TECHNICAL DATA ATO-84

FABRIC & VINYL

Form: GDH-369

Rev.: 052014

.DESCRIPTION AND USES .

Rust-Oleum

Fabric & Vinyl is a flexible coating that restores

color on vinyl, simulated leather and some fabrics. This vinyl

coating provides excellent adhesion that will not rub off, crack or

peel. It is suitable for use on vinyl furniture, luggage, car seats,

car door panels, dashboards, floor mats and other interior

surfaces.

.PRODUCTS .

SKU (4 ounce bottle) Description

277149 Black

279327 Sand

..PRODUCT APPLICATION .

PAINTING CONDITIONS

Use when temperature is above 60°F (15°C) and humidity

is below 85% to ensure proper drying.

SURFACE PREPARATION

Clean surface with mineral spirits, using a clean cloth to

dry the surface. When dry, follow with soap and water,

rinse thoroughly and dry with a clean cloth. Mask

surrounding area to protect from drips and spills.

..PRODUCT APPLICATION (cont.) .

APPLICATION

With cap on, shake bottle for one minute. Recap and

shake as needed during the painting process. Depress the

sponge applicator tip in an inconspicuous area or onto a

piece of scrap material to start the paint flow. Apply paint

using light pressure on the bottle. For best appearance,

apply one thin coat. Let the surface dry thoroughly and

then apply two additional coats.

DRY & RECOAT

Dry and recoat times are based on 70°F (21°C) and 50%

relative humidity. Allow more time at cooler temperatures.

Dries to the touch in 20 minutes, to handle in 1 hour and is

fully dry in 24 hours. Wait at least 6 hours before sitting on

or using a painted object.

CLEAN-UP

Drips and spills should be cleaned before paint is dry to

the touch. Use water or a rag saturated with rubbing

alcohol. Clean sponge applicator by immersing in hot

water. Replace the cap tightly and store bottle upright.

NOTE: Do not allow the paint to freeze.

Summary of content (2 pages)

PAGE 1
TECHNICAL DATA ATO-84 FABRIC & VINYL .DESCRIPTION AND USES . ..PRODUCT APPLICATION (cont.) ® APPLICATION Rust-Oleum Fabric & Vinyl is a flexible coating that restores color on vinyl, simulated leather and some fabrics. This vinyl coating provides excellent adhesion that will not rub off, crack or peel. It is suitable for use on vinyl furniture, luggage, car seats, car door panels, dashboards, floor mats and other interior surfaces. .PRODUCTS . With cap on, shake bottle for one minute.
PAGE 2
TECHNICAL DATA FABRIC & VINYL PHYSICAL PROPERTIES . FABRIC & VINYL Resin Type Polyurethane Black - Organic Pigment Type N-methyl Pyrrolidone, Glycol Ether EP Solvents Weight Solids Sand - Organic/Inorganic Per Gallon 8.8 lbs. 9.4 lbs. Per Liter 1.05 kg 1.13 kg By Weight 31.3% 37.2% By volume 27.3% 28.9% Volatile organic Compounds <250 g/l (2.08 lbs./gal.) Recommended Dry Film Thickness (DFT) Per Coat 0.5 mils (12.5µ) Wet Film to Achieve DFT 2.