MSDS

Date Printed: 6/27/2014
SKIN PROTECTION: Use impervious gloves to prevent skin contact and absorption of this material through the skin. Nitrile or
Neoprene gloves may afford adequate skin protection. Use gloves to prevent prolonged skin contact.
EYE PROTECTION: Use safety eyewear designed to protect against splash of liquids.
OTHER PROTECTIVE EQUIPMENT: Refer to safety supervisor or industrial hygienist for further information regarding personal
protective equipment and its application. Refer to safety supervisor or industrial hygienist for further guidance regarding types of
personal protective equipment and their applications.
HYGIENIC PRACTICES: Wash thoroughly with soap and water before eating, drinking or smoking. Remove contaminated clothing
immediately and launder before reuse.
9. Physical and Chemical Properties
Vapor Density Heavier than Air Odor: Solvent Like
Appearance: Liquid Evaporation Rate: Slower than Ether
Solubility in Water: Negligible Freeze Point: N.D.
Specific Gravity: 0.980 pH: N.A.
Physical State: Liquid
(See section 16 for abbreviation legend)
10. Stability and Reactivity
CONDITIONS TO AVOID: Flammable hydrogen gas will evolve when product comes in contact with water or damp air. Heat will be
generated. The amount of heat generated will depend upon the volume of material in contact. Avoid all possible sources of ignition.
Avoid temperatures above 120 ° F. Avoid contact with strong acid and strong bases.
INCOMPATIBILITY: Incompatible with strong oxidizing agents, strong acids and strong alkalies.
HAZARDOUS DECOMPOSITION: By open flame, carbon monoxide and carbon dioxide. When heated to decomposition, it emits
acrid smoke and irritating fumes. Contains solvents which may form carbon monoxide, carbon dioxide, and formaldehyde.
HAZARDOUS POLYMERIZATION: Will not occur under normal conditions.
STABILITY: This product is stable under normal storage conditions.
11. Toxicological Information
Chemical Name LD50 LC50
Acetone 5800 mg/kg (Rat) 50100 mg/m3 (Rat, 8Hr)
1-Chloro-4-(Trifluoromethyl)Benzene 4479 ppm (Rat, Inhalation) 6800 mg/kg (Rat, Oral)
Methyl Acetate 6970 mg/kg (Rat) >16000 ppm (4Hr)
n-Butyl Acetate 13100 mg/kg (Rat, Oral) 2000 ppm (Rat, Inhalation, 4Hr)
Aluminum Flake >2000 mg/kg (Rat, Oral) 7.6 mg/L (Rat, Inhalation)
12. Ecological Information
ECOLOGICAL INFORMATION: Product is a mixture of listed components. Product is a mixture of listed components.
13. Disposal Information
DISPOSAL INFORMATION: Dispose of material in accordance to local, state and federal regulations and ordinances. Do not allow
to enter waterways, wastewater. soil, storm drains or sewer systems.
Page 3 / 5