Use and Care Manual

TECHNICAL DATA
PROFESSIONAL GRADE TRUCK BED COATING
Rust-Oleum Corporation Form: GDH-318
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 041014
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
PHYSICAL PROPERTIES .
PROFESSIONAL GRADETRUCK BED COATING
Resin Type
Synthetic Rubber
Pigment Type
Carbon Black
Fill Weight
15 ounces
Solvents
Acetone, Methyl Amyl Ketone, N-butyl Acetate, Xylene, VM&P Naphtha
Recommended Dry Film
Thickness (DFT) Per Coat
3.0-4.0 mils
(75-100µ)
Practical Coverage
at Recommended DFT
7.0 sq. ft./can
(0.65 m
2
/can)
Dry Times
at 77°F (25°C) and
50%
Rel. Hum.
Tack-free
1 hour
Handle
1 hour
Recoat
30 minutes
Shelf Life
5 years
Flash Point
-156°F (-104°C)
Safety Information
For additional information, see MSDS.
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature
do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we
can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All
technical information is subject to change without notice.