SDS

US. NIOSH: Pocket Guide to Chemical Hazards
ValueComponents Type
100 ppm
TWA 590 mg/m3acetone (CAS 67-64-1)
250 ppm
Biological limit values
ACGIH Biological Exposure Indices
ValueComponents Determinant Specimen Sampling Time
50 mg/l Acetone Urine
*
acetone (CAS 67-64-1)
* - For sampling details, please see the source document.
Appropriate engineering
controls
Explosion-proof general and local exhaust ventilation. Good general ventilation (typically 10 air
changes per hour) should be used. Ventilation rates should be matched to conditions. If
applicable, use process enclosures, local exhaust ventilation, or other engineering controls to
maintain airborne levels below recommended exposure limits. If exposure limits have not been
established, maintain airborne levels to an acceptable level. Provide eyewash station. Eye wash
fountain and emergency showers are recommended.
Individual protection measures, such as personal protective equipment
Eye/face protection
Wear safety glasses with side shields (or goggles).
Skin protection
Hand protection
Wear protective gloves.
Other
Wear suitable protective clothing.
Respiratory protection
If engineering controls do not maintain airborne concentrations below recommended exposure
limits (where applicable) or to an acceptable level (in countries where exposure limits have not
been established), an approved respirator must be worn.
Thermal hazards
Wear appropriate thermal protective clothing, when necessary.
General hygiene
considerations
When using do not smoke. Always observe good personal hygiene measures, such as washing
after handling the material and before eating, drinking, and/or smoking. Routinely wash work
clothing and protective equipment to remove contaminants.
9. Physical and chemical properties
Appearance
Physical state
Liquid.
Form
Liquid.
Color
Clear colorless or nearly colorless
Odor
Solvent.
Odor threshold
Not available.
pH
Not available.
Melting point/freezing point
-138.46 °F (-94.7 °C) estimated
Initial boiling point and boiling
range
132.89 °F (56.05 °C) estimated
Flash point
-4.0 °F (-20.0 °C) estimated
Evaporation rate
Not available.
Flammability (solid, gas)
Not applicable.
Upper/lower flammability or explosive limits
Flammability limit - lower
(%)
2.6 % estimated
Flammability limit - upper
(%)
12.8 % estimated
Explosive limit - lower (%)
Not available.
Explosive limit - upper (%)
Not available.
Vapor pressure
153.94 hPa estimated
Vapor density
Not available.
Relative density
Not available.
4 / 10
Material name: LOW VOC CLEAR
ROB-262178 Version #: 01 Issue date: 05-07-2015
SDS US