Use and Care Manual

TECHNICAL DATA ATO-46

AUTOMOTIVE LOW VOC

EPOXY & LACQUER THINNER

Form: GDH-36

Rev.: 040813

.DESCRIPTION AND USES .

Rust-Oleum

Low VOC Epoxy & Lacquer Thinner is a blended,

low VOC solvent designed for use with most lacquer based

wood and metal finishes. Lacquer Thinner is compatible with

acrylic, epoxies, automotive or other specialty lacquers. It is

suitable for thinning lacquer based paints, epoxies, and clear

finishes to improve leveling and reduce viscosity without affecting

clarity and gloss. Carefully read all directions, notes and cautions

prior to use.

.PRODUCTS .

SKU Description

261195 1-Gallon

261196 1-Quart

..PRODUCT APPLICATION .

INSTRUCTIONS

Use only with adequate ventilation. Always follow the paint

manufacturer’s instructions for proper reduction ratios. Do not

use more than recommended. Protect hands with solvent-

resistant gloves and eyes with safety glasses. Add gradually and

stir until desired consistency is obtained. Excessive amounts

may decrease hiding power or cause blushing. Clean brushes

and spray equipment as long as lacquer remains wet on the

tools. Do not use to remove large areas of carpet adhesive,

asphalt tile or carpet cement. For this use a non-flammable

remover. Do not use on rubber, plastic, linoleum or synthetic

bristle brushes.

NOTE: Lacquer Thinner is extremely flammable and should not

be used for cleaning or degreasing large areas. If you are using

this product in the workplace, read the Material Safety Data

Sheet before using.

PAGE 1
TECHNICAL DATA ATO-46 AUTOMOTIVE LOW VOC EPOXY & LACQUER THINNER .DESCRIPTION AND USES . ..PRODUCT APPLICATION Rust-Oleum® Low VOC Epoxy & Lacquer Thinner is a blended, low VOC solvent designed for use with most lacquer based wood and metal finishes. Lacquer Thinner is compatible with acrylic, epoxies, automotive or other specialty lacquers. It is suitable for thinning lacquer based paints, epoxies, and clear finishes to improve leveling and reduce viscosity without affecting clarity and gloss.
PAGE 2
TECHNICAL DATA AUTOMOTIVE LOW VOC EPOXY & LACQUER THINNER PHYSICAL PROPERTIES . LOW VOC EPOXY & LACQUER THINNER Solvent Type Weight Contains Acetone and Oxsol Per Gallon 7.00 lbs. Per Liter 0.84 kg VOC 0 g/l Shelf Life 5 years Flash Point -4°F (-20°C) Safety Information FOR ADDITIONAL INFORMATION, SEE MSDS The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith.