Use and Care Manual

TECHNICAL DATA
2 in 1 FILLER & SANDABLE PRIMER
Rust-Oleum Corporation Form: GDH-111
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 071613
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
PHYSICAL PROPERTIES .
2 in 1 FILLER & SANDABLE PRIMER
Resin Type
Modified Alkyd
Pigment Type
Titanium Dioxide and Inorganic Pigments
Solvents
Acetone and Aromatic Hydrocarbons
MIR
1.20 Max
Fill Weight
11 ounces
Recommended Dry Film
Thickness (DFT) Per Coat
1.5-2.5 mils (37.5-62.5µ)
Practical Coverage
at Recommended DFT
10-12 sq. ft./can
(0.90-1.09 m
2
/can)
Dry Times
at 70°F (21°C)
and 50% Relative
Humidity
Touch
10 minutes
Recoat
Anytime after 10 minutes
Fully Dry
24 minutes
Dry Heat Resistance
200°F (93°C)
Shelf Life
5 years
Flash Point
-156°F (-104°C)
Safety Information
For additional information, see MSDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature
do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we
can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All
technical information is subject to change without notice.