Use and Care Manual

TECHNICAL DATA
CALIPER KIT
Rust-Oleum Corporation Form: CS2185
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 030113
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
PHYSICAL PROPERTIES .
CALIPER CLEANER
CALIPER PAINT
Resin Type
NA
Modified Alkyd
Pigment Type
NA
Organic
Solvents
Acetone & Aromatic Hydrocarbons
Stoddard Solvent Blend
MIR
0.60 Max
NA
Fill Weight
11 ounces
NA
Weight
Per Gallon
NA
7.7 lbs.
Per Liter
NA
0.92 kg
Solids
By Weight
NA
48.0%
By Volume
NA
37.5%
VOC
NA
<475 g/l
3.95 lbs./gal.
Recommended Dry Film Thickness
(DFT) per Coat
NA
3.0-4.0 mils
(75-100µ)
Practical Coverage at
Recommended DFT (assumes
15% material loss)
4-8 calipers/can
8-10 sq.ft./half-pint
Dry Times at
70°F (21°C) and
50% Relative
Humidity
Touch
NA
2-4 hours
Handle
NA
5-9 hours
Fully Dry
NA
24 hours
Shelf Life
5 years
5 years
Flash Point
-156°F (-104°C)
104ºF (40ºC)
Safety Information
For additional information, see MSDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature
do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we
can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All
technical information is subject to change without notice.