Use and Care Manual

TECHNICAL DATA
AUTOMOTIVE AUTO BODY CLEAR
Rust-Oleum Corporation Form: GDH-30
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 040115
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
PHYSICAL PROPERTIES .
AUTO BODY CLEAR
Resin Type
Thermoplastic Acrylic
Pigment Type
NA
Solvents
Acetone, Methyl N-amyl Ketone, and Aromatic Hydrocarbons
Weight
Per Gallon
8.6-9.6 lbs.
Per Liter
1.03-1.15 kg
Solids
By Weight
9.3-10.3%
By Volume
8.5-9.5%
VOC
<400 g/l (3.32 lbs./gal.)
Recommended Dry Film
Thickness (DFT) Per Coat
1.0-1.5 mils
(25-37.5µ)
Practical Coverage
at Recommended DFT
50-75 sq. ft./quart
(1.2-1.8 m
2
/l)
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
30 minutes
Full Dry
1 hour
Recoat
Anytime
Shelf Life
5 years
Flash Point
-4°F (-20°C)
Safety Information
For additional information, see MSDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature
do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we
can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All
technical information is subject to change without notice.