Use and Care Manual

TECHNICAL DATA
AUTOMOTIVE AUTO BODY PAINT
Rust-Oleum Corporation Form: GDH-28
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 040313
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
PHYSICAL PROPERTIES .
AUTO BODY PAINT
Resin Type
Acrylic
Pigment Type
Varies with color
Solvents
Acetone, Methyl Acetate, and Aromatic Hydrocarbons
Weight
Per Gallon
7.7-8.7 lbs.
Per Liter
0.93- 1.04 kg
Solids
By Weight
16.5-25.5%
By Volume
11.3-20.6%
VOC
<400 g/l (3.32 lbs./gal.)
Recommended Dry Film
Thickness (DFT) Per Coat
1.0-1.5 mils (25-37.5µ)
Wet Film to Achieve DFT
(unthinned material)
5.0-13.0 mils (125-325µ)
Depending on color
Practical Coverage
at Recommended DFT
40-50 sq. ft./quart
(1.0-1.2 m
2
/l)
Dry Times
at 77°F (25°C)
and 50%
Rel. Hum.
Touch
30 minutes
Full Dry
1 hour
Recoat
Anytime
Shelf Life
5 years
Flash Point
-4°F (-20°C)
Safety Information
For additional information, see MSDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature
do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we
can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All
technical information is subject to change without notice.