Use and Care Manual

TECHNICAL DATA
AUTOMOTIVE AUTO BODY PRIMER
Rust-Oleum Corporation Form: GDH-29
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 040313
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
PHYSICAL PROPERTIES .
AUTO BODY PRIMER
Resin Type
Acrylic Nitrocellulose Modified Rosin
Pigment Type
Titanium Dioxide, Talc, Carbon Black
Solvents
Acetone, Methyl Acetate, and Aromatic Hydrocarbons
Weight
Per Gallon
9.25-10.25 lbs.
Per Liter
1.108-1.23 kg
Solids
By Weight
18.2-24.2%
By Volume
8.5-13.2%
VOC
<375 g/l (3.12 lbs./gal.)
Recommended Dry Film
Thickness (DFT) Per Coat
1.0-1.5 mils (25-37.5µ)
Practical Coverage
at Recommended DFT
40-50 sq. ft./quart
(1.0-1.2 m
2
/l)
Dry Times
at 70°F (21°C) and
50% Relative
Humidity
Touch
20 minutes
Handle
30-60 minutes
Recoat
1 hour
Shelf Life
5 years
Flash Point
-4°F (-20°C)
Safety Information
For additional information, see MSDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature
do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we
can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All
technical information is subject to change without notice.