Use and Care Manual

TECHNICAL DATA
AUTOMOTIVE LIGHT GRAY SANDABLE PRIMER
Rust-Oleum Corporation Form: RAC-26
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 012813
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
PHYSICAL t
Physical Properties
LIGHT GRAY SANDABLE PRIMER
Resin Type
Short Oil Alkyd
Pigment Type
Titanium dioxide, Inorganic Red, Organic Blue
MIR
1.50 Max
Fill Weight
12 ounce
Solvents
Xylene, Mineral Spirits, Aromatic 150, N-Butyl Acetate, Naphtha, Acetone
Recommended Dry Film
Thickness (DFT) Per Coat
1 mil
(25 microns)
Practical Coverage at Recommended
DFT (assumes 15% material loss)
10-15 sq.ft./can
Dry Times at 77°F
(25°C) and 50%
Relative Humidity
Tack-free
10 min
Handle
2 hours
Recoat
Immediate when dry
Dry Heat Resistance
200°F (93°C)
Shelf Life
5 years
Cautions
Flash Point
-156°F (-104°C)
Warning
For additional Information see MSDS.
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.