Use and Care Manual

TECHNICAL DATA
AUTOMOTIVE ENAMEL
Rust-Oleum Corporation Form: CS1924
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 010813
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
PHYSICAL PROPERTIES .
AUTOMOTIVE ENAMEL
Resin Type Modified Alkyd
Pigment Type Varies with color
Fill Weight 1.40 Max
Solvents 11 ounces
MIR Acetone and Aromatic Hydrocarbons
Recommended Dry Film
Thickness (DFT) Per Coat
1.0-2.0 mil (25-50µ)
Practical Coverage
at Recommended DFT
8-10 sq.ft./can (0.90-1.1 m
2
/can)
Dry Times
at 77°F (25°C)
and 50%
Rel. Hum.
Touch 15 minutes
Handle 1-2 hours
Fully Dry 24 hours
Shelf Life 5 years
Flash Point -156°F (-104°C)
Warning!
For additional information, see MSDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature
do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we
can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All
technical information is subject to change without notice.