Use and Care Manual

TECHNICAL DATA
CALIPER PAINT
Rust-Oleum Corporation Form: CS2184
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 030113
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
PHYSICAL PROPERTIES .
CALIPER PAINT
Resin Type
Modified Alkyd
Pigment Type
Organic
Solvents
Stoddard Solvent Blend
Weight
Per Gallon
7.7 lbs.
Per Liter
0.92 kg
Solids
By Weight
48.0%
By Volume
37.5%
VOC
<475 g/l
3.95 lbs./gal.
Recommended Dry Film
Thickness (DFT) per Coat
3.0-4.0 mils
(75-100µ)
Practical Coverage at
Recommended DFT (assumes
15% material loss)
8-10 sq.ft./half-pint
Dry Times at
70°F (21°C) and
50% Relative
Humidity
Touch
2-4 hours
Handle
5-9 hours
Fully Dry
24 hours
Shelf Life
5 years
Flash Point
104ºF (40ºC)
Safety Information
For additional information, see MSDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature
do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we
can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All
technical information is subject to change without notice.