MSDS

Handling: Follow all MSDS/label precautions even after container is emptied because it may retain product
residues. Use only in a well-ventilated area. Avoid breathing vapor or mist. Wash thoroughly after handling. Wash
hands before eating.
Storage: Keep containers tightly closed. Isolate from heat, electrical equipment, sparks and open flame. Contents
under pressure. Do not expose to heat or store above 120 ° F. Do not store above 120 ° F. Store large quantities
in buildings designed and protected for storage of NFPA Class I flammable liquids.
Engineering Controls: Prevent build-up of vapors by opening all doors and windows to achieve cross-ventilation.
Use explosion-proof ventilation equipment. Use process enclosures, local exhaust ventilation, or other
engineering controls to control airborne levels below recommended exposure limits.
Respiratory Protection: A NIOSH/MSHA approved air purifying respirator with an organic vapor cartridge or
canister may be permissible under certain circumstances where airborne concentrations are expected to exceed
exposure limits.
Protection provided by air purifying respirators is limited. Use a positive pressure air supplied respirator if there is
any potential for an uncontrolled release, exposure levels are not known, or in any other circumstances where air
purifying respirators may not provide adequate protection. A respiratory protection program that meets OSHA
1910.134 and ANSI Z88.2 requirements must be followed whenever workplace conditions warrant a respirator's
use.
Skin Protection: Nitrile or Neoprene gloves may afford adequate skin protection. Use impervious gloves to prevent
skin contact and absorption of this material through the skin.
Eye Protection: Use safety eyewear designed to protect against splash of liquids.
Other protective equipment: Refer to safety supervisor or industrial hygienist for further information regarding
personal protective equipment and its application.
Hygienic Practices: Wash thoroughly with soap and water before eating, drinking or smoking.
(See section 16 for abbreviation legend)
Conditions To Avoid: Avoid temperatures above 120 ° F. Avoid all possible sources of ignition.
Incompatibility: Incompatible with strong oxidizing agents, strong acids and strong alkalies.
Section 7 - Handling And Storage
Section 8 - Exposure Controls / Personal Protection
Section 9 - Physical And Chemical Properties
Vapor Density:
Heavier than Air
Odor:
Solvent Like
Appearance:
Aerosolized Mist
Evaporation Rate:
Faster than Ether
Solubility in H2O:
Slight
Freeze Point:
N.D.
Specific Gravity:
0.736
pH:
N.A.
Physical State:
Liquid
Section 10 - Stability And Reactivity
Page
3
of
6
251592 AUTORF SSPR 6PK CALIPER PAINT BLACK