Use and Care Manual

TECHNICAL DATA
AUTOMOTIVE HIGH PERFORMANCE WHEEL
Rust-Oleum Corporation Form: GDH-11
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 052517
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
PHYSICAL PROPERTIES .
HIGH PERFORMANCE WHEEL
Resin Type
Acrylic
Pigment Type
Proprietary
Solvents
Acetone, Toluene, Xylene
MIR
1.25 Max
Fill Weight
11 ounces
Recommended Dry Film
Thickness (DFT) Per Coat
1.0-2.0 mils
(25-50µ)
Practical Coverage
at Recommended DFT
8-10 sq.ft./can
(0.74-0.93 m
2
/can)
Dry Times @ 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
10 minutes
Recoat
10 minutes
Fully Dry
30 minutes
Shelf Life
5 years
Flash Point
-156°F (-104°C)
Safety Information
For additional information, see SDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature
do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we
can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All
technical information is subject to change without notice.