Use and Care Manual

TECHNICAL DATA
AUTOMOTIVE LOW VOC TRUCK BED COATING
Rust-Oleum Corporation Form: CS1922
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 011013
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
PHYSICAL PROPERTIES .
LOW VOC TRUCK BED COATING
Resin Type
Alkyd modified acrylic
Pigment Type Carbon Black
Solvents Aromatic hydrocarbons and glycol ether
Fill Weight Per Gallon 8.50 lbs./gal.
Per Liter 1.02 kg
Solids By Weight 39.4%
By Volume 29.9%
Volatile Organic Compounds 617 g/l (5.15 lbs./gal.)
Recommended Dry Film
Thickness (DFT) Per Coat
1.5-2.5 mils
(37.5-62.5µ)
Wet Film to Achieve DFT
(unthinned material)
8-10 mils
(200-250µ)
Theoretical Coverage at
1 mil DFT (25µ)
480 sq. ft./gal.
(11.8 m
2
/l)
Practical Coverage
at Recommended DFT
140-160 sq. ft./gal. (3.4-3.9 m
2
/l)
35-40 sq. ft./qt. (0.85-1.0 m
2
/l)
Dry Times
at 77°F (25°C)
and 50%
Rel. Hum.
Touch
1-2 hours
Recoat After 2 hours
Full Cure 24 hours
Dry Heat Resistance 200°F (93°C)
Shelf Life 5 years
Safety
Information
Flash Point
52°F (11°C)
Warning!
FOR ADDITIONAL INFORMATION, SEE MSDS.
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature
do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we
can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All
technical information is subject to change without notice.